
Co-op s Million-Dollar Impact on One Company
Keeping money from being vaporized
University of Cincinnati engineering student Andy Eding, currently on a six-month co-op with Marathon, worked this summer to redesign a vent line from a solvent drum so that vapor containing valuable hydrocarbons (burned off during the refinery process) could be recovered. The project has already been implemented, and the recovered propane and butane is now being used as an additional saleable product.
Cost of project implementation: $220,000
Estimated savings realized by company: $1,300,000 per year
Plugging steam (and money) leaks
In another project this summer, UCs Andy Eding led a refinery-wide steam-leak audit and repair project where he had responsibility for the program and worked directly with the refinery-production supervisors to achieve results. Subsequent audits documented improvements in two areas of the refinery.
Estimated savings: $1,200,000 per year
Cleaning up
University of Cincinnati engineering student Tim McKnight, currently on co-op with Marathon, also worked there in the fall of 2004. On one project, he estimated the fouling factors in two key heat exchangers and estimated their maintenance-cleaning needs and the cost factors involved. His proposals were implemented.
Cost of cleaning the exchangers: $12,300
Savings realized by company: $95,000 over a two-month operating cycle
NOT paying the piper
West Virginia University student Josh Santrock worked on a project in early 2005 to analyze energy loss along nearly 2,000 feet of pipeline used to carry reduced (partially refined) crude. Santrock identified areas of heat loss, insulation needs and the economic cost/benefit of pipe insulation. His proposals were implemented.
Cost of project implementation: $37,000
Estimated savings realized by company: $126,000 per year
Steaming ahead with energy efficiency
Michigan Technological University student Roberta Larsen investigated a proposed steam-heat recovery project that would provide greater energy efficiency in a steam-utility system that is used in the process of refining crude oil. She performed the process and cost analysis in summer 2005, and the project has been approved based on her recommendation.
Cost of project implementation: $26,400
Estimated savings realized by company: $110,000 per year
Environmental education
Further action is required to make this image accessible
One of the below criteria must be satisfied:
- Add image alt tag OR
- Mark image as decorative
The image will not display on the live site until the issue above is resolved.
Mississippi State University student James Kyzar worked at Marathons Savage Branch Wildlife Reserve, owned and operated by Marathons Catlettsburg Refinery, in the fall of 2004. He implemented environmental-education projects with local elementary schoolchildren. Activities included life cycles of native animals, pH experiments, pond-species identification and microscope viewing of pond organisms.
Operations inspections
Further action is required to make this image accessible
One of the below criteria must be satisfied:
- Add image alt tag OR
- Mark image as decorative
The image will not display on the live site until the issue above is resolved.
Co-op students from the University of Wisconsin and the University of Kentucky have also been at work recently with Marathon, performing mechanical design and inspection projects to improve operations. These students worked side-by-side with chemical engineers to verify the proper installation of internal parts to distillation towers and other equipment during a major maintenance shutdown.
Related Stories
UC Honors students gain hands-on research experience
April 1, 2025
The Biomedical Research and Mentoring Program is open to any University Honors Program students. The faculty mentors are typically from UC’s College of Medicine or Cincinnati Children's Hospital.
UC engineer applying generative AI to smart manufacturing
March 31, 2025
Manish Raj Aryal, a PhD student in mechanical engineering at the University of Cincinnati, is working on revolutionizing manufacturing systems through generative AI, leveraging AI systems to develop manufacturing assistant chatbots. He came to UC for his master's degree and continued researching as a PhD student. He was named Graduate Student Engineer of the Month by the College of Engineering and Applied Science (CEAS).
Exploring careers in robotics engineering: A path to the future
March 28, 2025
Discover robotics engineering careers: skills, paths, and opportunities in manufacturing, healthcare, and space. Explore salaries and how to start at UC’s CEAS.